5 Amps DIN FLV4 Lighting Control Module 4 Channels Dimming Controller
0-10V Dimming Controller Features
> 4 channels of 0-10 Volt dimming control
> Supports 120 and 220 to 240 Volt, 50/60 Hz applications
> Allows switching of lighting and exhaust fans
> Includes an override input
> Communicates using DC-NET
> Sets up via the front panel or through software
> Offers programmable functionality via DIN-CP1
The DIN-FLV4 is a 4-channel lighting control module designed to dim 0-10 Volt drivers and ballasts. A single model supports both 120 and 220 to 240 Volt applications. The DIN-FLV4 may also be used for switching of non-dimmable lighting loads up to 5 amps[1] and 1/2 HP motors.
Our Protocol:
MODBUS, ASCII, Third-party, DMX and DC NET Bus
0-10V Dimming Controller Installation
The DIN-FLV4 is designed to snap onto a standard DIN rail for installation in a wall mount enclosure. Wiring connections are made using screw terminals positioned along the top and bottom, clearly accessible from the front for easy installation and servicing. All setup controls and indicators are positioned on the center front panel. When installed in an enclosure utilizing 45 mm cutouts, the DIN-FLV4’ s front panel stays accessible while the connections are concealed.
0-10V Dimming Controller Specifications
| Dimmer Channels | 4 |
| Maximum Per Channel | 5 Amps @ 120 to 240 Volts AC, 50/60 Hz |
| Dim Load Types | 0-10 Volt fluorescent ballast or LED driver (4-wire); Maximum of 40 dimmable ballasts/drivers |
| Switch Load Types | Incandescent, magnetic low-voltage, electronic low-voltage, neon/cold cathode, fluorescent, motors |
| Temperature | 32° to 104°F (0° to 40°C) |
| Humidity | 10% to 90% RH (non-condensing) |
0-10V Dimming Controller Connections
1. OUTPUT 1 – 4: (2) 4-pin 3.81mm detachable terminal blocks comprising (4) isolated dimming control outputs
2. Voltage Control Range: 0 to 10 Volts DC
3. Maximum Sink Current: 100mA per channel;
4. Connector: (4) sets of (2) captive screw terminals; Isolated Class 1 SPST relay switchcircuits 1 – 4;
5. Relay Rating: 5 Amps maximum per channel
6. Maximum Wire Size: 12 AWG (2.5 mm²)
0-10V Dimming Controller Application
Automation Lighting Control System Applied in: stadium, school, hospital, airport, metro, church, office, commercial building, parking lot/car park/parking area, outdoor spaces, foyer, lobby, elevator hall, public walkway, bathroom, underground garage, meeting room, villa, home lighting, plazas, shopping malls, public building, industrial plants and factories, etc
Different packing at optional:
1. Retailing Packing:
Neutral Carton Package
2. Bulking Packing:
Carton Package-Can save packing cost
Anti-static bag--Can protect electronic components from potential electrostatic hazards
3. Customized Packing
Can design and pack according to your requirement,such as colorful box,blister
packing,sealed packing with your company information, bar code,ect. ( Discuss extral)
Product Tags:
|
|
5 Amps DIN FLV4 Lighting Control Module 4 Channels Dimming Controller Images
|
