4 Channels DIN FLV4 Lighting Control Module With DC NET Communication
0-10V Dimming Controller Features
> 4 channels of 0-10 Volt dimming control
> Supports 120 and 220 to 240 Volt, 50/60 Hz applications
> Allows switching of lighting and exhaust fans
> Includes an override input
> Communicates using DC-NET
> Sets up via the front panel or through software
> Offers programmable functionality via DIN-CP1
The DIN-FLV4 is a 4-channel lighting control module designed to dim 0-10 Volt drivers and ballasts. A single model supports both 120 and 220 to 240 Volt applications. The DIN-FLV4 may also be used for switching of non-dimmable lighting loads up to 5 amps[1] and 1/2 HP motors.
Our Protocol:
MODBUS, ASCII, Third-party, DMX and DC NET Bus
0-10V Dimming Controller Installation
The DIN-FLV4 is designed to snap onto a standard DIN rail for installation in a wall mount enclosure. Wiring connections are made using screw terminals positioned along the top and bottom, clearly accessible from the front for easy installation and servicing. All setup controls and indicators are positioned on the center front panel. When installed in an enclosure utilizing 45 mm cutouts, the DIN-FLV4’ s front panel stays accessible while the connections are concealed.
0-10V Dimming Controller Specifications
| Dimmer Channels | 4 |
| Maximum Per Channel | 5 Amps @ 120 to 240 Volts AC, 50/60 Hz |
| Dim Load Types | 0-10 Volt fluorescent ballast or LED driver (4-wire); Maximum of 40 dimmable ballasts/drivers |
| Switch Load Types | Incandescent, magnetic low-voltage, electronic low-voltage, neon/cold cathode, fluorescent, motors |
| Temperature | 32° to 104°F (0° to 40°C) |
| Humidity | 10% to 90% RH (non-condensing) |
0-10V Dimming Controller Connections
1. OUTPUT 1 – 4: (2) 4-pin 3.81mm detachable terminal blocks comprising (4) isolated dimming control outputs
2. Voltage Control Range: 0 to 10 Volts DC
3. Maximum Sink Current: 100mA per channel;
4. Connector: (4) sets of (2) captive screw terminals; Isolated Class 1 SPST relay switchcircuits 1 – 4;
5. Relay Rating: 5 Amps maximum per channel
6. Maximum Wire Size: 12 AWG (2.5 mm²)
0-10V Dimming Controller Application
Automation Lighting Control System Applied in: stadium, school, hospital, airport, metro, church, office, commercial building, parking lot/car park/parking area, outdoor spaces, foyer, lobby, elevator hall, public walkway, bathroom, underground garage, meeting room, villa, home lighting, plazas, shopping malls, public building, industrial plants and factories, etc
FAQ
1. What is intelligent lightincontrol g system?
A lighting control system is an intelligent network based lighting control solution that incorporates communication between various system inputs and outputs related to lighting control with the use of one or more central computing devices. Lighting control systems are widely used on both indoor and outdoor lighting of commercial, industrial, and residential spaces.
2. What is the advantage compare with the traditional lighting control?
Improve energy efficiency
Reduce maintenance cost
Easy operation and more convenient
3. What Okystar can supply for you?
Okystar can offer a whole solution of lighting control system for you, economic and customization, with industrial-grade design, product architecture in line with international electrical standards, using high-quality components, products are stable and reliable.
Product Tags:
|
|
12 AWG 4 Channels Lighting Control Module For Stadium School Home Images
|
